Automotive Medium Cutting Polishing Paints Renew

Product Description

 #8500 Nano Rubbing Compound combines strength and finesse, removing fine scratches and defects. We engineered this automotive paint rubbing compound for use with newer clear coats that are used in shops today. The innovative combination of mineral and chemical technology cuts the fastest, minimizing pad heating. It maximizes productivity while still leaving the finest finish, minimizing machine polishing in the next step. It leaves such a fine finish it is recommended as a rubbing compound on headlights.

Key Benefits, special features

Removes swirl marks after compounding

Creates a deep, high gloss finish

Best performing, fastest cutting compound also leaves the finest finish

Polishing System

Recommended Usage

1.Clean surface thoroughly prior to polishing.

2.Shake the bottle prior to use and apply a small quantity of the product onto the polishing pad (a pea-sized drop is sufficient for an area measuring approx. 40 x 40 cm).

3.Without change to other compound, only change the pads from Lambwool Pad W500-6" to Foam Polishing Pad W800-7" and Foam Final Pad W900-7".

4.Use either a rotary or an orbital polishing machine and use the cross-coating method. Apply light pressure at the start of the polishing process. Take away the pressure in the final cycles and increase the speed of the polishing machine. 

5.If working on very dry coatings, soak the pad, and spin off excess water,  to prevent dust formation.

6.At first, the polish will seem a little milky and should be worked in until only a slightly transparent/oily film is visible.

7.Once you have finished polishing, remove any residue with our Microfiber Towel, without applying any pressure.