Commercial Using Water Based Car Scratch Remover

Product Description

905 Scratch Remover quickly removes traces of 1200 water sandpaper, as well as severe paint stains and dirt, orange peel, Hyun stripes, oxide layer.

Gradually grinding particles, rapid cutting of coarse particles, automatically decomposed into fine particles, not easy to damage the paint. Works like a medium sanding polish and removes 3000 grit and finer sanding marks by machine

Key Benefits, special features

Versatile：One-step polish, high-gloss finish and wax in a single product

Application：by hand and DIY using

Standard process：Cut+Polish+Wax

Polishing System

Recommended Usage

1.Clean surface thoroughly prior to polishing.

2.Shake the bottle prior to use and apply a small quantity of the product onto the polishing pad (a pea-sized drop is sufficient for an area measuring approx. 40 x 40 cm).

3.Use the Polishing Foam Pad W8007 or Finish Foam Pad W9007. If using a new or dry pad, apply sufficient polish to prevent the formation of noticeable holograms. 

4.Use either a rotary or an orbital polishing machine and use the cross-coating method. Apply light pressure at the start of the polishing process. Take away the pressure in the final cycles and increase the speed of the polishing machine. 

5.If working on very dry coatings, soak the pad, and spin off excess water,  to prevent dust formation.

6.At first, the polish will seem a little milky and should be worked in until only a slightly transparent/oily film is visible.

7.Once you have finished polishing, remove any residue with our Microfiber Towel, without applying any pressure.