Rapid Abrasive Cutting Polish Compound Pastes
- strongreturn
- china
- within 15 days
- 10000 pcs/day
300 Plus Paste Compound offers rapid removal of minor surface defects and swirl marks from all modern paint systems. Super on darker colors, which is recommended for use on OEM and re-finish paint systems. This versatile product can be used by hand or machine
Product Description:
The 300 Plus Paste Compound enables the swift elimination of minor surface flaws and swirl marks from all contemporary paint systems. It performs exceptionally well on darker colors and is recommended for application on both OEM and re-finish paint systems. This versatile product can be utilized either manually or with a machine.
Key Benefits and Special Features:
Silicone-Free: Completely safe for body shops, with 100% absence of silicone.
Permanent Finish: Does not contain any fillers, ensuring that scratch marks do not resurface.
Combined Cut/Polish: Removes P1200 marks and provides a final finish with outstanding gloss. It can be used in conjunction with 7000B Finishing Compound to achieve an enhanced gloss finish on dark colors.
Recommended Usage:
1. Thoroughly clean the surface before commencing the polishing process.
2. Before application, shake the bottle well and apply a small amount of the product onto the polishing pad. A pea-sized drop is adequate for an area approximately 40 x 40 cm.
3. In case of severe signs of use, employ the Cutting Foam Pad. When using a new or dry pad, apply sufficient polish to avoid the creation of visible holograms.
4. Utilize either a rotary or an orbital polishing machine and adopt the cross-coating approach. Apply gentle pressure at the beginning of the polishing operation. In the final cycles, reduce the pressure and increase the speed of the polishing machine.
5. If working on extremely dry coatings, soak the pad and spin off the excess water to prevent the formation of dust.
6. Initially, the polish might appear slightly milky; it should be worked until only a faintly transparent or oily film is observable.
7. After completing the polishing, eliminate any remaining residue using our Microfiber Towel without exerting pressure.
8. All signs of sanding and use should now be removed. For an exceptionally shiny finish and protection, apply 908 Ultra Seal.
