Fast Cutting Rubbing Micro Abrasive Polish

Product Description

Exclusive, super-micro abrasive technology

Ultra-fast cutting removes 1500 grit or finer sanding marks

Super-micro abrasives leaves best in class finish

Great for removing scratches, defects, acid rain and severe swirls/holograms

Key Benefits, special features

Versatile:Suitable for all types of coating, MS or HS paints

Silicone Free & wax fee:safe for use in spray shop

Standard process:Step 1

Polishing System

Recommended Usage

1.Clean surface thoroughly prior to polishing.

2.Shake the bottle prior to use and apply a small quantity of the product onto the polishing pad (a pea-sized drop is sufficient for an area measuring approx. 40 x 40 cm).

3.Use the Lambs wool Pad W5006 in the event of heavy signs of use. If using a new or dry pad, apply sufficient polish to prevent the formation of noticeable holograms. 

4.Use either a rotary or an orbital polishing machine and use the cross-coating method. Apply light pressure at the start of the polishing process. Take away the pressure in the final cycles and increase the speed of the polishing machine. 

5.If working on very dry coatings, soak the pad, and spin off excess water,  to prevent dust formation.

6.At first, the polish will seem a little milky and should be worked in until only a slightly transparent/oily film is visible.

7.Once you have finished polishing, remove any residue with our Microfiber Towel, without applying any pressure.

8.Any signs of sanding and use have now been removed. For an exceptionally glossy finish and protection, apply 908 Ultra Seal.