Polish Final Finish Swirl Remover Glaze Wax

Product Description

#9000 Polish - Final Finish is part of a line of specially designed compounds and polishes to be used on OEM and baked refinish paints to remove sand scratches or to remove swirl marks from previously compounded areas and is designed to produce best results when used with an air or electric buffer equipped with our foamed buffing pads.

Key Benefits, special features

Removes swirl marks after compounding

Creates a deep, high gloss finish

Top glossy finish compound

Polishing System I

Polishing System II

Recommended Usage

1.Clean surface thoroughly prior to polishing.

2.Shake the bottle prior to use and apply a small quantity of the product onto the polishing pad (a pea-sized drop is sufficient for an area measuring approx. 40 x 40 cm).

3.Use the Finish Foam Pad W9007. If using a new or dry pad, apply sufficient polish to prevent the formation of noticeable holograms. 

4.Use either a rotary or an orbital polishing machine and use the cross-coating method. Apply light pressure at the start of the polishing process. Take away the pressure in the final cycles and increase the speed of the polishing machine. 

5.If working on very dry coatings, soak the pad, and spin off excess water,  to prevent dust formation.

6.At first, the polish will seem a little milky and should be worked in until only a slightly transparent/oily film is visible.

7.Once you have finished polishing, remove any residue with our Microfiber Towel, without applying any pressure.